JD-FEP1124N current signal sensor JD-FEP1124N current signal sensor
key word:
Category:
Enclosure:
Hotline:
- Details
- Structure Size
- Performance
-
- Commodity name: JD-FEP1124N current signal sensor JD-FEP1124N current signal sensor
JD-FEP1124N current signal sensor (referred to as sensor) is used to monitor the current signal of the power supply of fire fighting equipment; It can monitor the three-phase and three-way current signal.
The sensor uses two buses for communication, which can monitor whether there is an overcurrent fault in the power supply of the monitored device in real time and upload the state to the monitor. The sensor samples the current values of the monitored power supply in real time, and the monitor can view these current values.
This product adopts the guide rail installation structure, easy to install the construction, the appearance is generous and beautiful.
Main Features
1, the sensor adopts two-wire bus power supply communication, no polarity connection.
2. Built-in high-performance microprocessor.
3. Accurately collect the voltage and current value of the monitored equipment with an accuracy of 10%.
4, the sensor internal monitoring circuit and the external high voltage circuit between the complete isolation design.
5, software and hardware filtering technology, improve the anti-interference ability of the module.
-
Dimensions: length 104mm x width 85mm x height 42mm
-
Operating voltage Bus operating voltage: bus 24V, the allowable range is 15V ~ 28V Bus operating current ≤0.6mA
The bus Two wire system, no polarity Mode of encoding Electronic coding Coded address range 1～240
Monitoring voltage range ≤AC5A
The temperature -10℃～+55℃
Relative humidity ≤95%RH，No condensation
Provide solutions to your questions and prepare for your choices
Recommended Products
JB-QB-F13 Fire Alarm Controller (Interlocking)
JB-QB-F13 Fire alarm controller (linkage type)
More +Jty-gm-d 12-point optical smoke detector
JTY-GM-D12 Smoke detector-Point detectors using scattered light,Trans mitteil
More +Contact Us
Add：Building 8, No. 88 Wansong Road, Lingang New Area, China (Shanghai) Pilot Free Trade Zone
Tel：+86-021-68189000
E-mail：market@shjd.com
Web：www.shjd-intel.com
Follow us
Copyright © Shanghai Jindun Fire Safety Equipment Co.,Ltd. All Right